Steel Framed Building in Worcestershire
New project for a steel framed building based in Worcestershire
Our client was looking to increase his portfolio of Commercial Buildings for lease. The client wanted one building, to create 2 small units for lease.
| Height to low eaves | 5.4m |
| Overall outside of cladding Gable Width | 13m |
| Overall outside of cladding Length | 15m |
| Roof Pitch | 12 degrees |
| Building Style | Ridge |
| Number of Bays | 4 |
| Cladding type roof
Cladding Type Left Gable Cladding Type Right Gable Cladding Type Front Elevation Cladding Type Rear Elevation |
115mm Core Composite Panel 150mm O/A
80mm Core Composite Panel 115mm O/A 80mm Core Composite Panel 115mm O/A 80mm Core Composite Panel 115mm O/A 80mm Core Composite Panel 115mm O/A |
| Column and rafter depth | 400mm single construction |
| Rain water system | Yes |
| Circa 10% roof lights | Trimline – Poppy Red BS04E53 |
Colours Chosen
| Flashings/Trim | Poppy Red BS04E53 |
| Roofing Cladding & Ridge Flashing | Van Dyke Brown BS08B29 |
| Wall Cladding | Van Dyke Brown BS08B29 |
Openings provided
Front elevation
- 2no. Roller door openings, supply and installation of roller doors by others. 3.3 mtrs wide x 4.0 mtrs high
- 2 no. PA door openings. PA doors to be supplied and fitted by others. Structural openings 0.92 m wide x 2.075 m high
Rear elevation
- 2 no. PA door openings. PA doors to be supplied and fitted by others. Structural openings 0.92 m wide x 2.075 m high
Project Photos of Steel Framed building erection gallery
If you’re looking for help and advice or just need a quote for a new steel building project you can contact us on the above number, or alternatively use our quotation tool.