Steel Building Workshop in Shropshire
Customer project – Steel Building Workshop, Shropshire.
Our client had recently moved from the south East to Shropshire and need a suitable workshop. To continue building his miniature steam engines.
What we provided
Steel Buildings provide the ground works, steel Workshop and installation of the workshop.
Steel Buildings provided an Insulated Composite Roof, with none insulated wall sheets. The client wanted to save money, by insulating the walls himself. While fitting out the internal of building.
| Height to low eaves | 2.5m |
| Overall outside of cladding Gable Width | 8m |
| Overall outside of cladding Length | 15m |
| Roof Pitch | 12 degrees |
| Building Style | Ridge |
| Number of Bays | 4 |
| Cladding type roof
Cladding Type Left Gable Cladding Type Right Gable Cladding Type Front Elevation Cladding Type Rear Elevation |
100mm Core Composite Panel – 135mm O/A Non insulated Plastisol 0.5 without Anti Con Non insulated Plastisol 0.5 without Anti Con Non insulated Plastisol 0.5 without Anti Con Non insulated Plastisol 0.5 without Anti Con |
| Rain water system | Trimline – Juniper Green BS12B29 |
Colours Chosen
| Flashings/Trim | Juniper Green BS12B29 |
| Roofing Cladding | Juniper Green BS12B29 |
| Wall Cladding | Juniper Green BS12B29 |
Doors & Openings
Front elevation
- 1no. Industrial Roller Door, manufactured from 0.7mm 75mm Galv laths.
- Supplied with 100mm top Brushes and Bottom Seals as standard.
- To suit an opening 3000mm wide x 2100mm high
- Colour Coated – Juniper Green BS12B29
- 1no. Single PA steel security door, powder coated.
- Hinged on the right and opening outwards as you view the door from inside the building.
- Structural Opening – 920mm wide x 2075mm high
- Door Frame – 910mm wide x 2065mm high
- Colour Coated – Juniper Green BS12B29
Steel Workshop Gallery
